Gear Jacks Example Set Ups

Have a look at the example setups below to help determine which Gear Jack components are needed for your model. Click on an aircraft model in the table below to jump to the example setup for that model. From the example setups you can click on a Gear Jack Model to view details about that component. Click the add button to add a component to your shopping cart or click the Add to Cart button opposite the Total Setup price to add all the components to your cart at once.

Setup # Brand Model Size Wing Length
1 3DHS Edge 540 74" 71.5"
2 Aeroworks Extra 260 QB 96" 80"
3 AJ Aircraft 230Z 123" 114"
4 AJ Aircraft 230Z 105" 102"
5 AJ Aircraft 230Z 60" 57"
6 Aviation Jets Atlas Sport Jet 2.2m
7 Carden CAP 232 35% 104" 100"
8 Extreme Flight Extra 300 35% 104" 110"
9 Legacy Aviation Muscle Coupe 72" 52.25
10 Roban A-10 81" 61.7"
11 Top RC Model P-51D 89" 77.4"
12 Zeal Jets Viper 99.2" 89.4"


Setup # Manufacturer Model Size Wing Length
1 3DHS Edge 540
74" 71.5"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-WTSA-STD Wing Tube Support Assembly - Standard Mounted to Gladiator® Gear Track; supports dummy wing tube (shown here with additional 'pool noodle' padding. $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to Gladiator Gear Track; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
4 GJ-JP Joining Plate Connects sections of Gladiator Gear Track in a 'tee' configuration. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
5 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $275.00


Setup # Manufacturer Model Size Wing Length
2 Aeroworks Extra 260 QB
96" 80"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-WTSA-STD Wing Tube Support Assembly - Standard Mounted to Gladiator® Gear Track; supports wing tube to keep wheels off the floor. $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to Gladiator Gear Track; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
4 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. Gladiator® Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $250.00


Setup # Manufacturer Model Size Wing Length
3 AJ Aircraft Laser 230Z
123" 114"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-SSA-STD Strut Support Assembly Mounted to a section of Gladiator® Gear Track that is screwed to trailer floor; supports landing gear struts. $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to a section of Gladiator Gear Track that is screwed to trailer floor; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
4 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $250.00


Setup # Manufacturer Model Size Wing Length
4 AJ Aircraft Laser 230Z
105" 102"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-SSA-STD Strut Support Assembly Mounted directly to plywood shelf; supports landing gear struts $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted directly to plywood shelf; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $225.00


Setup # Manufacturer Model Size Wing Length
5 AJ Aircraft Laser 230Z
60" 57"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-WTSA-STD Wing Tube Support Assembly - Standard Mounted to Gladiator® Gear Track; supports dummy wing tube (shown here with additional 'pool noodle' padding). $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to Gladiator Gear Track; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
4 GJ-JP Joining Plate Connects sections of Gladiator Gear Track in a 'tee' configuration. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $30.00 1 ea.
5 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $280.00


Setup # Manufacturer Model Size Wing Length
6 Aviation Jets Atlas Sport Jet
2.2m


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-HSA-STD Headless Stanchion Assembly Mounted on Gladiator Gear Track. $40.00 2 ea.
2 GJ-DIY-FSB-16 Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD); supports nose and tail. DIY bent to match fuselage shape at nose and tail. $45.00 2 ea.
3 GJ-FSA-STD Fuselage Support Assembly Mounted on small sections of Gladiator Gear Track; supports wing root and prevents fuselage roll. $160.00 1 pr.
4 GJ-JP-XT Cross Tee Joining Plate Joins small sections of Gladiator Gear Track to long section in a 'cross tee' configuration; allows Fuselage Support Assemblies to slide fore and aft for position adjustment. $40.00 1 ea.
5 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. This setup requires hardware for four Gear Jacks so 2 ea. are shown in Qty column. $25.00 2 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $420.00


Setup # Manufacturer Model Size Wing Length
7 Carden CAP 232 35% 104" 100"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-SSA-STD Strut Support Assembly Mounted to section of Gladiator® Gear Track that is screwed to trailer floor; supports landing gear struts. $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to section of Gladiator Gear Track that is screwed to trailer floor; supports fuselage tail. $75.00 1 ea.
3 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
4 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $250.00


Setup # Manufacturer Model Size Wing Length
8 Extreme Flight Extra 300 35% 104" 110"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-SSA-STD Strut Support Assembly Mounted to section of Gladiator® Gear Track that is screwed to trailer floor; supports landing gear struts. $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to section of Gladiator Gear Track that is screwed to trailer floor; supports fuselage tail. $75.00 1 ea.
3 GJ-SS-40 Soft Strap Wide Neoprene strap secures tail to Tail Support Assembly (GJ-TSA-LP). $22.00 1 ea.
4 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $262.00


Setup # Manufacturer Model Size Wing Length
9 Legacy Aviation Muscle Coupe
72" 52.3"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-SSA-STD Strut Support Assembly Mounted to section of Gladiator® Gear Track; supports landing gear struts $140.00 1 pr.
2 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted to Gladiator Gear Track; supports fuselage tail. $75.00 1 ea.
3 GJ-SS-40 Soft Strap Wide Neoprene strap secures tail to Tail Support Assembly (GJ-TSA-LP). $22.00 1 ea.
4 GJ-JP Joining Plate Connects sections of Gladiator Gear Track in a 'tee'configuration. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $30.00 1 ea.
5 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator Gear Track. Gladiator Gear Track is available at home improvement stores (e.g. Lowes) $25.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $292.00


Setup # Manufacturer Model Size Wing Length
10 Roban A-10
81" 61.7"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-HSA-STD Headless Stanchion Assembly Mounted to Gladiator® Gear Track. One each at nose and tail. $40.00 2 ea.
2 GJ-DIY-FSB-16 DIY Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD) to support fuselage nose. DIY bent to match fuselage shape at nose. $45.00 1 ea.
3 GJ-DIY-FSB-12 DIY Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD) to support fuselage tail. DIY bent to match fuselage shape at tail. $40.00 1 ea.
4 GJ-FSA-STD Fuselage Support Assembly Mounted on small sections of Gladiator Gear Track; supports wing root and prevents fuselage roll. $160.00 1 pr.
5 GJ-SS-40 Soft Strap Wide Neoprene straps secure nose and tail to Fuselage Support Brackets (GJ-DIY-FSB-16, -12). $22.00 2 ea.
6 GJ-GTHS Gear Track Handle Set Provides lifting points for Gladiator Gear Track Assembly. $25.00 1 pr.
7 GJ-JP-XT Cross Tee Joining Plate Joins small sections of Gladiator Gear Track to long section in a 'cross tee' configuration; allows Fuselage Support Assemblies to slide fore and aft for position adjustment. $40.00 1 ea.
8 GJ-GTH Gear Track Hardware Kit Hardware kit to attach three Gear Jacks to Gladiator® Gear Track. This setup requires hardware for four Gear Jacks so 2 ea. are shown in Qty column. $25.00 2 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $484.00


Setup # Manufacturer Model Size Wing Length
11 Top RC Model P-51D
89" 77.4"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-HSA-STD Headless Stanchion Assembly Mounted directly to plywood base beneath fuselage nose. $40.00 2 ea.
2 GJ-DIY-FSB-16 DIY Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD) to support fuselage nose. DIY bent to match fuselage shape at nose. $45.00 1 ea.
3 GJ-FSA-STD Fuselage Support Assembly Mounted directly to plywood base; supports wing root and prevents fuselage roll. $160.00 1 pr.
4 GJ-TSA-LP Tail Support Assembly - Low Profile Mounted directly to plywood base; supports fuselage tail. $75.00 1 ea.
5 GJ-BAB Build A Bungee Kit Custom length padded bungee secures tail to Tail Support Assembly (GJ-TSA-LP). $10.00 1 ea.
6 GJ-SS-40 Soft Strap Wide Neoprene strap secures fuselage to brackets of Fuselage Support Assembly (GJ-FSA-STD) and Fuselage Support Bracket (GJ-DIY-FSB-16). $22.00 1 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $392.00


Setup # Manufacturer Model Size Wing Length
12 Zeal Jets Viper
99.2" 89.4"


#
Gear Jack Model
Comment
Unit Price
Qty
1 GJ-HSA-STD Headless Stanchion Assembly Mounted directly to plywood base beneath nose and tail. $40.00 2 ea.
2 GJ-FSA-STD Fuselage Support Assembly Mounted directly to plywood base; supports wing root and prevents fuselage roll. $160.00 1 pr.
3 GJ-DIY-FSB-16 DIY Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD) to support fuselage nose. DIY bent to match fuselage shape. $45.00 1 ea.
4 GJ-DIY-FSB-12 DIY Fuselage Support Bracket Mounted on Headless Stanchion Assembly (GJ-HSA-STD) to support fuselage tail. Left flat to fit between ventral fins. $40.00 1 ea.
5 GJ-SS-40 Soft Strap Wide Neoprene strap secures fuselage to Fuselage Support Assembly (GJ-FSA-STD) and the Fuselage Support Bracket (GJ-FSB-16). $22.00 2 ea.
*Gladiator Gear Track IS NOT included in any set ups. It's available at home improvement stores, e.g., Lowe's. Total Setup $369.00