Home > SHOP Gear Jacks >

Gear Jack Fuselage Support Assembly - Standard
Gear Jack Fuselage Support Assembly - Standard


 
Alternate Views:


Gear Jack Fuselage Support Assembly - Standard
(pair)
$160.00

Stock Status:In Stock

Product Code: GJ-FSA-STD
Qty:

Description
 

Gear Jack Fuselage Supports — What they do for you.

Supporting an RC turbine jet or large RC warbird requires at least three, and often four, points of support. The core of the setup is a pair of Fuselage Support Assemblies, one located on each side of the fuselage near the wing root. They carry the heaviest part of the aircraft and restrict roll movement during transport. The unequal legs of the Support Brackets let you decide how far to reach under the aircraft as dictated by the fuselage shape. And since the brackets are made from powder-coated 5052 aluminum, you can easily bend them to better conform to the fuselage shape.

Useful Features:

  • Four degrees of freedom make it easy to support different fuselage shapes and sizes.
  • Wide padded Fuselage Support Brackets provide 'cushion' and distribute the fuselage weight.
  • The 'L' shape can be positioned to reach 2" or 5" under the fuselage and it can be bent to conform to the fuse as needed.
  • Fits perfectly on Gladiator® Gear Track — one set up can accommodate many different airplanes.
  • Reconfigure your Gear Jacks in just minutes when you need to secure a different airplane.

Kit (assembly required) Includes:

  • Standard 6" tall powder-coated aluminum Stanchion Brackets.
  • Standard length 6" Lifting Tubes.
  • 2-1/2" wide Fuselage Support Brackets with 3" wide, 3/4" thick closed cell foam pads and high tech double sided mounting tape.
  • Rust and corrosion resistant hardware.
  • Download Assembly Instructions here.

Optional Accessories You Might Find Useful

  • Tee Knobs — Add these thumb screw knobs to your Gear Jacks and make adjustments without tools
  • Hex Key Kit — The three Hex Keys used in assembling and adjusting Gear Jacks System Components
  • Long and Extra Long Lifting Tubes — Extend the reach of your Gear Jacks for larger or taller airplanes
  • Mounting Screw Kit — Truss head tapping screws to mount your Gear Jacks to wood, metal or plastic
  • Build A Bungee Kit — Make custom length, padded bungees to tie down your airplane's tail
  • Soft Strap Kit — Secure delicate fuselages with this strong yet soft 3" wide neoprene strap
  • Gladiator® Gear Track Hardware — Mount a set of three Gear Jacks on Gladiator® Gear Track
  • Gladiator® Gear Track Joining Plate — Lock two sections of Gladiator® Gear Track in a 'Tee' to create an portable hold-down system for Trucks and SUVs
  • Gladiator® Gear Track Cross Tee Joining Plate — Mount a pair of Fuselage supports on perpendicular sections of Gladiator® Gear Track to make your Jet setup accommodate different models

Learn More About Gear Jacks


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Model RC Stand April 1, 2022
Reviewer: Stacy Jussila from CALGARY, AB Canada  
Simply the best stand for your model airplanes!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 19, 2021
Reviewer: Clarence Bishop from ROGERS, AR United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Item as described July 27, 2021
Reviewer: Javier Rodriguez from Delray Beach, FL United States  
Fast Shipping, just the solution I was looking for to transport my airplanes safely in a pickup truck

Was this review helpful to you?