Home > SHOP Gear Jacks >

Joining Plate for Gladiator® Gear Track
Joining Plate for Gladiator® Gear Track


 
Alternate Views:


Joining Plate for Gladiator® Gear Track
$30.00

Stock Status:In Stock

Product Code: GJ-JP
Qty:

Description
 

Create a portable, adjustable hold down system for your airplane!

This custom joining plate lets you fasten together two sections of Gladiator® Gear Track in a 'Tee.' With a pair of Strut or Wing Tube Supports on the 'cross' section and a Tail Support on the longer, 'leg' section you can secure an airplane in vehicles quickly, securely, and best of all, portably. It's a great solution for SUVs and pickup trucks and it works equally well as a setup/run up stand.

Gladiator® Gear Track is available at most home improvement stores in 4' sections. With the optional Gear Track Hardware Kit you can attach three Gear Jacks to the Gladiator® Gear Track. The Gear Track Hardware Kit even includes tie down points for a bungee to secure the airplane's tail.

Kit (assembly required) Includes

  • 1 Powder coated 16 gauge steel Joining Plate
  • 8 10-24 x 5/8" Stainless Steel Socket Head Cap Screws
  • 8 #10 Stainless Steel Flat Washers
  • 2 2.0" O.C. Double Nuts
  • 2 3.0" O.C. Double Nuts
  • Assembly instructions

Optional Accessories You Might Find Useful

  • Tee Knobs — Add these thumb screw knobs to your Gear Jacks and make adjustments without tools
  • Hex Key Kit — The three Hex Keys used in assembling and adjusting Gear Jacks System Components
  • Long and Extra Long Lifting Tubes — Extend the reach of your Gear Jacks for larger or taller airplanes
  • Mounting Screw Kit — Truss head tapping screws to mount your Gear Jacks to wood, metal or plastic
  • Build A Bungee Kit — Make custom length, padded bungees to tie down your airplane's tail
  • Soft Strap Kit — Secure delicate fuselages with this strong yet soft 3" wide neoprene strap
  • Gladiator® Gear Track Hardware — Mount a set of three Gear Jacks on Gladiator® Gear Track
  • Gladiator® Gear Track Joining Plate — Lock two sections of Gladiator® Gear Track in a ‘Tee’ to create an portable hold-down system for Trucks and SUVs
  • Gladiator® Gear Track Cross Tee Joining Plate — Mount a pair of Fuselage supports on perpendicular sections of Gladiator® Gear Track to make your Jet setup accommodate different models

Learn More About Gear Jacks


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 The best possible customer service ! December 7, 2023
Reviewer: Henri RICHARD from Los Altos Hills, CA United States  
Dealing with Random R/C is an unbelivably satisfying experience. Fast delivery, attention to detail and some of the most customer centric experience I have had in the entire RC business. And the products are fantastic !!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Joining Plate June 5, 2020
Reviewer: MB Gosson from Syracuse, NY United States  
I defy anyone to make a better kit for the money.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 July 31, 2018
Reviewer: Peter Vogel from Santa Clara, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 22, 2017
Reviewer: Steven Morlock from Young Harris, GA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 16, 2017
Reviewer: Greg Sheetz from Greeley, CO United States  


Was this review helpful to you?