Home > SHOP Gear Jacks >

Tee Knob Set
Tee Knob Set


 
Alternate Views:


Build-A-Bungee Kit
$5.00

Stock Status:In Stock

Product Code: GJ-TK-20
Qty:

Description
 

Make adjustments to your Gear Jacks without tools.

These Tee knobs press fit onto the heads of the 1/4-20 socket head cap screws used to lock the Gear Jack Carriage Block and the angle of the support bracket. Once installed, you won't need a hex key to adjust your Gear Jack angles and reach.

The kit contains enough Tee knobs for a set of three Gear Jacks, three knobs on each Gear Jack. It also includes 6 flat washers for use as spacers on the three pairs of Carriage Locking Bolts (so the knobs clear the Carriage axle screw).

Installing the Tee knobs requires an anvil press, vise, or large C clamp. Do NOT attempt to drive them on using a hammer.

Kit includes:

  • 9 Tee Knobs for 1/4-20 Socket Head Cap Screws
  • 6 1/4" flat washers

Optional Accessories You Might Find Useful:

  • Tee Knobs — Add these thumb screw knobs to your Gear Jacks and make adjustments without tools
  • Hex Key Kit — The three Hex Keys used in assembling and adjusting Gear Jacks System Components
  • Long and Extra Long Lifting Tubes — Extend the reach of your Gear Jacks for larger or taller airplanes
  • Mounting Screw Kit — Truss head tapping screws to mount your Gear Jacks to wood, metal or plastic
  • Build A Bungee Kit — Make custom length, padded bungees to tie down your airplane's tail
  • Soft Strap Kit — Secure delicate fuselages with this strong yet soft 3" wide neoprene strap
  • Gladiator® Gear Track Hardware — Mount a set of three Gear Jacks on Gladiator® Gear Track
  • Gladiator® Gear Track Joining Plate — Lock two sections of Gladiator® Gear Track in a 'Tee' to create an portable hold-down system for Trucks and SUVs
  • Gladiator® Gear Track Cross Tee Joining Plate — Mount a pair of Fuselage supports on perpendicular sections of Gladiator® Gear Track to make your Jet setup accommodate different models

Learn More About Gear Jacks


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Very useful. September 15, 2023
Reviewer: Michael L Roxberry from Jackson, MI United States  
Theses little knobs make adjustments a snap.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Knob Set April 25, 2022
Reviewer: James LeSage from Windermere , FL United States  
Looks great. Have to press fit the knobs before assembly. I did it with my bench vice.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 July 11, 2020
Reviewer: Michael Gosson from Syracuse, NY United States  
What can I say about this excellent addition to the lineup. Forget about carrying around a hex wrench. Press the T knobs on the hex screw, voila.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 19, 2018
Reviewer: tom noland from tiger, GA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 16, 2017
Reviewer: Greg Sheetz from Greeley, CO United States  


Was this review helpful to you?

View All Customer Reviews