Home > Gear Jacks >

Gear Jack Tail Support Assembly - Low Profile
Gear Jack Tail Support Assembly - Low Profile


 
Alternate Views:


Gear Tail Support Assembly - Low Profile
$70.00

Stock Status:In Stock
Product Code: GJ-TSA-LP
Qty:

Description
 

Gear Jack Tail Supports – What they do for you.

Gear Jack Tail Supports are a fast, efficient way to secure the tail of many types of RC airplanes. Placed under the fuselage, they 'cradle' the tail and keep the tail wheel off the ground—preventing damage to the tail wheel and strut. With a Gear Jack Tail support you can lock down the tail and know that you'll arrive at the field without damage to tail wheel or control surfaces.

Because they're so easy to adjust, guys are also using Tail Supports as part of a work/adjustment stand. With the Tail Support raised to set the airplane fuselage perfectly level, fine adjustments like wing incidence can be made quickly and confidently.

And to quickly secure your tail to the Tail Support without damage, you might want to add a custom bungee to your Gear Jack setup. With Random Heli's Build-A-Bungee Kit you can make a bungee for the tail that is the perfect length and strength.

Useful Features:

  • Four degrees of freedom make it easy to support different fuselage types, shapes, and sizes.
  • Padded Tail Support Plate adds ‘cushion’ and protects delicate fuselage surfaces.
  • Tail Support Plate can be bent to better conform to fuselage shape.
  • Fits perfectly on Gladiator® Gear Track—one set up can accommodate many different airplanes.
  • Reconfigure your Gear Jacks in just minutes when you need to secure a different airplane.

Kit (assembly required) Includes:

  • 3" high, low profile powder-coated aluminum Stanchion Bracket — fits better under fuselage tail.
  • Standard length 6” Lifting Tube.
  • Tail Support Bracket with 2" wide, ¾” thick closed cell foam pad.
  • Rust and corrosion resistant hardware.
  • Download Assembly Instructions here.

Optional Accessories You Might Find Useful

  • Tee Knobs — Add these thumb screw knobs to your Gear Jacks and make adjustments without tools
  • Hex Key Kit — The three Hex Keys used in assembling and adjusting Gear Jacks System Components
  • Long and Extra Long Lifting Tubes — Extend the reach of your Gear Jacks for larger or taller airplanes
  • Mounting Screw Kit — Truss head tapping screws to mount your Gear Jacks to wood, metal or plastic
  • Build A Bungee Kit — Make custom length, padded bungees to tie down your airplane's tail
  • Soft Strap Kit — Secure delicate fuselages with this strong yet soft 3" wide neoprene strap
  • Gladiator® Gear Track Hardware — Mount a set of three Gear Jacks on Gladiator® Gear Track
  • Gladiator® Gear Track Joining Plate — Lock two sections of Gladiator® Gear Track in a ‘Tee’ to create an portable hold-down system for Trucks and SUVs
  • Gladiator® Gear Track Cross Tee Joining Plate — Mount a pair of Fuselage supports on perpendicular sections of Gladiator® Gear Track to make your Jet setup accommodate different models

Learn More About Gear Jacks


Average Rating: 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
December 22, 2017
Reviewer: Steven Morlock from Young Harris, GA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
December 16, 2017
Reviewer: Greg Sheetz from Greeley, CO United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
November 30, 2017
Reviewer: Ron Sormrude from West palm beach, FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Well built great addition to the trailer October 20, 2017
Reviewer: Robert Houin from Salem, WI United States  
This is a much better solution to transporting my aerobatic planes than I have used in the past.

Was this review helpful to you?