Check out what other pilots are doing with Skid Clamps
We'd love to see your pics here, too. And we'll send you a $10 GIFT COUPON for sharing them.
Click here to see how it works.


Buzz Browder
Buzz's transport platform in his pickup truck is unique. He used a really slick piece of hardware to make the platform removeable.
Buzz Browder
Notice the three T-Track rails to accommodate different widths of struts.
Buzz Browder
Most SAB Goblins (and 450 or smaller helis) will need T-Tracks spaced just 3.5" on center. Larger helis with conventional tube skids will fit better on rails around 5" on center.
Buzz Browder
Buzz recessed the T-Track into the platform. Notice the slot for the T-Track extends past the track end making it faster to add or remove Skid Clamps.
Buzz Browder
The platform is secured to the truck bed using aircraft 'L' track bolted to the bed. You can get it here.
Buzz Browder
A single nut and bolt in the 'L' track completely secure the platform. The bolt can be removed so the hardware is quite flush and out of the way when the platform is not needed.
RC Helicopter transport platform in Mini van holds four SAB Goblin helis.
Kevin St-Cyr
Kevin and his dad, Steve, built a really fine transport platform for their Mini van
Four Goblin helis secured for transport in mini van using T-Track and Skid Clamps from Random Heli
Kevin St-Cyr
Recessed T-Track and carpet covering.
Four RC helicopters secured to sliding shelf in pickup truck using Random Heli Skid Clamps
Jake Sutherlund
Sliding Shelf in pickup truck. Note the channels at each side that retain the shelf.
Four RC helicopters secured to sliding shelf in pickup truck using Random Heli Skid Clamps
Jake Sutherlund
During transport the shelf is all the way forward. At the field, the tailgate is lowered and the shelf is pulled out.
Compass Warp 360 RC heli is secured for transport in pickup truck using Random Heli STC9000 Skid Clamp
Jake Sutherlund
Compass Warp 360 being secured with STC9000 Skid Clamps. Works great.
Three RC Helicopters secured to board on rear seat of crew cab pickup truck
Steve Hornsby
T-Track on board secures the helis. The board just sits on the rear seat in the crew cab of the truck
Random Heli T-Track used for transporting RC helicopters in pickup truck
Steve Hornsby
Skid Clamps used for securing RC Heli during setup with Soko Heli Tool
Steve Rosenlund
I use this tray for keeping y Heli steady during Soko Heli Tool set ups as well as when I'm traveling. I love these things.
SAB Goblin with F3C skids secured by Random Heli Skid Clamp model STC6377LP
Art Hughes
SAB Goblin 700 with tube-style F3C skids. The Clamps are STC6377LP with this mod.
SAB Goblin 500 secured to T-Track using Skid Clamps
Art Hughes
Using three T-track rails lets you accommodate helis as small as the Goblin 500, or even the 380 while still having a deep stance for the large models.
SAB Goblin 380 mounted on transport platform with Random Heli Skid Clamps and T-Track
Art Hughes
You can secure the Goblin 380 with CF skids using STC5000 and this mod.
Carpeted transport platformwith Random Heli T-Track and Skid Clamps
Art Hughes
Art's platform slides into his SUV and has plenty of room below for other gear.
Art Hughes and his RC Helicopter transport set up in SUV
Art Hughes
Art's platformand uses T-Track to give him the flexibility he needs to haul different models on different days. Plus it's just cool.
TREX 450 RC Helicopter mounted to door of utility trailer using Random Heli Skid Clamps
Jeff Felton
TREX 450 mounted to door of utility trailer