Check out what other pilots are doing with Skid Clamps
We'd love to see your pics here, too. And we'll send you a $10 GIFT COUPON for sharing them.
Click here to see how it works.


RC Helicopters mounted on a wall using Random Heli Skid Clamps
Brent Dustin
[I think Brent can use some Goblin Skid Clamps about now…]
SAB Goblin RC Helicopter mounted to folding table with Random Heli Skid Clamps for transport in vehicle
Jim Mackenzie
now I can transport the goblin and not have to worry about it getting bounced around in the back of the truck. I've only had the Goblin out once and I had wrapped it in a blanket and still had to watch how I was driving, what a pain. I would not want to drive to far without them.
SAB Goblin 770 RC Helictoper on work stand using Random Heli Skid Clamps (clips)
Mark Wechsler
Goblin 770 clipped onto workstand. The new Goblin clamps hold the heli really snug
SAB Goblin 770 RC Helictoper on work stand using Random Heli Skid Clamps (clips)
Mark Wechsler
No modifications needed - the new clips fit perfectly on the landing gear and into my work stand
SAB Goblin 770 RC Helictoper on work stand using Random Heli Skid Clamps (clips)
Mark Wechsler
The new clips were well worth the wait.
Four RC helicopters mounted on platform in Minivan for transport
Fred Carter
Random Heli rocks! These clamps look and work great! It really was a snap.
SAB Goblin 700 RC Heli mounted on work stand using Random Heli Skid Clamps (clips)
Dave
Goblin on the work stand. Mounted to a board on an old tripod. Makes working on it a breeze!
Custom platform for transporting RC helicopters in the back of a truck uses Random Heli Skid Clamps.
Adam Landefeld
Adjustable Platform for Multiple Heli. Designed to fit three helis side by side in the back of a truck for transport.
Custom platform for transporting RC helicopters in the back of a truck uses Random Heli Skid Clamps.
Adam Landefeld
Adjustable Platform for Multiple Heli. Designed to fit three helis side by side in the back of a truck for transport.
Custom platform for transporting RC helicopters in the back of a truck uses Random Heli Skid Clamps.
Adam Landefeld
Adjustable Platform for Multiple Heli. Designed to fit three helis side by side in the back of a truck for transport.
Three RC Helicopters mounted to wall using Random Heli Skid Clamps
Kory Enders
Ray, I love doing business with you, and as I collect my helis, I will always have a Pair of skid clamps to hold them! Thank you for designing them for the goblin! I now have trex-700, Rave Ballistic, and Goblin 700 hanging on my wall! Thank you again!
SAB Goblin RC Helicopter mounted to wall using Random Heli Skid Clamps
Kory Enders
Rave Ballistic and Trex 700 RC Helicopters mounted to wall using Random Heli Skid Clamps
Kory Enders
SAB Goblin 700 helicopter mounted to wall of trailer using Random Heli Skid Clamps
Ed O'Brien
Ed added a block beneath the skids as extra support for the Goblin 700 during transport inhis trailer. This reduces the side load on the Skid Clamps.
Synergy RC helicopter mounted to wall of trailer using Random Heli Skid Clamps
Ed O'Brien
Align Trex 500 RC helicopter mounted to wall using Skid Clamps
John Phillips
Picture of any Align 500 hanging over my desk. Love it.
Align Trex 500 RC helicopter mounted to wall using Skid Clamps
John Phillips
Here is the close up.
Custom platform for transporting two nitro helicopters in the back of a small car using Random Heli Skid Clamps.
Michael Hochsteiner
One side of the platform is prepared for two nitro-helis (the blue standoffs are taller than the Skid Clamps raising the platform off the floor of the vehicle so the Clamps on other side are clear)
Custom platform for transporting SAB Goblin and TDR RC helicopters in the back of a small car using Random Heli Skid Clamps.
Michael Hochsteiner
the other side of the platform is prepared for two electric Helis
Custom platform for transporting RC helicopters in the back of a small car using Random Heli Skid Clamps.
Michael Hochsteiner
these skid clamps work really perfect