Home > SHOP Skid Clamp Parts >

Skid Clamp Base Goblin 500/630/700/770 Black
Skid Clamp Base Goblin 500/630/700/770 Black


 
Skid Clamp Base Goblin 500/630/700/770 Black
STC5077-BASE-B
$9.00

Stock Status:In Stock


Product Code: STC5077-BASE-B
Qty:

Description
 

Storage & Transport Skid Clamp Base Goblin 500/630/700/770 Black

Model STC5077-B
Fits All Goblin Skid Clamp Models

Replace a damaged Skid Clamp latch or assemble your own custom Skid Clamps with contrasting colors to match your helis.

Includes:
  • 2 Clamp Bases Black
  • 2 .062" x .687" SS Dowel Pins
  • 2 12.5mm Self-adhesive Grip Discs

It's really easy to replace Goblin-style Latches.

  1. Using a small hex driver or awl, press the stainless steel hinge pin about 1mm-2mm out of the Clamp. Then, using ball link pliers or similar, gently pull the pin the rest of the way out of the Clamp.
  2. Position the new Latch so the hinge pin holes like up with the base.
  3. Hold the stainless steel hinge pin with pliers and gently press it through the Latch, into the Clamp Base, and out the other side until flush on both sides of the Latch.

Useful Resources

What Size Skid Clamp Fits My Heli?
How Skid Clamps Work
Skid Clamp Quick Tips

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
4 of 5 T-Nuts and Thumbscrews. January 23, 2022
Reviewer: Steven Massi from Charlotte, NC United States  
These work well and are well made. They are just the thumb screw and flat t-nut, but they work as intended.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 10 June 4, 2020
Reviewer: ami amar from metula galil alyon , galil alyon Israel  
Excellent product highly recommended thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Uh oh, break one? September 5, 2015
Reviewer: Craig Dziak from Ohio, United States  
Break a base because you mounted it backwards then tried to force your goblin skid into it?  No problem, buy a new base.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Customer Service June 19, 2015
Reviewer: Scott 'Gimpy' Golden from ON Canada  
This isn't a purchase review per se as I bought the G500 clamps at a dealer.
I had a clamp break, possible by my own doing only using one one each side of the machine for my pit table.

I contacted RH for warranty parts and Ray got back to me via email same day.
He not only sent replacements for the parts I had damaged but also enough to build a second set of clamps for the rear part of my skids.

Now my machine is secure on my pit table from being knocked/blown off and the tail stays put instead of moving all over as it did with only front clamps used.

These clamps on your pit table is a great way to ensure your machine doesn't crash before it even gets to the flight line. I'll grab some pic's of my setup and be posting a thread on HeliFreak to spread the word.

Was this review helpful to you?