Gear Jacks Tech Specs

Tech Specs Drawing for Random Heli Gear Jacks Fuselage Support Assembly
Tech Specs Drawing for Random Heli Gear Jacks Strut Support Assembly
Tech Specs Drawing for Random Heli Gear Jacks Tail Support Assembly
Tech Specs Drawing for Random Heli Gear Jacks Wing Tube Support Assembly

Fuselage Support - Standard
GJ-FSA-STD
Strut Support - Standard
GJ-SSA-STD
Strut Support- Low Profile
GJ-SSA-LP
Tail Support - Low Profile
GJ-TSA-LP
Wing Tube Support - Standard
GJ-WTSA-STD
Hs - Stanchion Height
5.0" [127]
5.0" [127]
3.5" [89]
3.5" [89]
5.0" [127]
H max - Maximum Height (STD, XL, XXL Lifting Tubes)†
11.0", 16.0", 21.0"
11.8", 16.8", 21.8"
10.3", 15.3", 20.3"
10.0", 15.0", 20.0"
11.8", 16.8", 21.8"
W - Stanchion Width
2.0" [51]
2.0" [51]
2.0" [51]
2.0" [51]
2.0" [51]
D - Stanchion Depth
4.2" [107]
4.2" [107]
4.2" [107]
4.2" [107]
4.2" [107]]
R - Max Reach (STD, XL, XXL Lifting Tubes)†
7.7", 12.7", 18.7"
7.7", 12.7", 18.7"
7.7", 12.7", 18.7"
7.7", 12.7", 18.7"
7.7", 12.7", 18.7"
R - Min Reach (STD, XL, XXL)†
3.7
3.7
3.7
3.7
3.7
Sv - Swing Range from Vertical
+/- 40°
+/- 40°
+/- 40°
+/- 40°
+/- 40°
Sh - Swing Range from Horizontal
+/- 40°
+/- 40°
+/- 40°
+/- 40°
+/- 40°
Mounting Hole Centers
1.25" x 3.0" [32 x 76]
1.25" x 3.0" [32 x 76]
1.25" x 3.0" [32 x 76]
1.25" x 3.0" [32 x 76]
1.25" x 3.0" [32 x 76]
Recommended Mounting Screw
#8 [4mm]
#8 [4mm]
#8 [4mm]
#8 [4mm]
#8 [4mm]
Weight Capacity [each]
30 lbs [13 kg]
30 lbs [13 kg]
30 lbs [13 kg]
30 lbs [13 kg]
30 lbs [13 kg]
† Standard Lifting Tubes are 6" long. XL and XXL Tubes are 11" and 17" respectively